Training SIS (Safety Instrumented System) & Control

TRAINING SIS (SAFETY INSTRUMENTED SYSTEM) & CONTROL  INTRODUCTION

The operation of many industrial processes involves inherent risks due to the presence of dangerous material like gases and chemicals. Safety Instrumented Systems SIS are specifically designed to protect personnel, equipment and the environment by reducing the likelihood (frequency) or the impact severity of an identified emergency event.

TRAINING OBJECTIVES SIS (SAFETY INSTRUMENTED SYSTEM) AND CONTROL

The best safety systems is not the most expensive but rather it is the most practicable system; this workshop focuses on the HAZOP management, Safety Standard Control, Hazardous Area & Electrical Classification planning and execution of automatic safety systems.

TRAINING MATERIAL OUTLINE SIS (SAFETY INSTRUMENTED SYSTEM) AND CONTROL

  1. Introduction
  2. Definitions, Overview, Standards
  3. Basics of Safety Instrumented System (SIS)
  4. Layer of Protection Analysis (LOPA)
  5. Safety Integrity Level (SIL)
  6. Probability of Failure on Demand (PFD)
  7. IEC 61508, IEC 61511 and ISA S84 Overview
  8. Hazards and Risk Reduction
  9. Hazard and Operability Studies (HAZOPS)
  10. Event Tree Analysis (ETA) & Fault Tree Analysis (FTA)
  11. Reliability Analysis
  12. Safety in Field Instruments & Devices
  13. Discussion, Case Study and Film

 

Kami dapat menyelenggarakan Public Training ataupun inhouse Training SIS (Safety Instrumented System) & Control di seluruh wilayah indonesia. Untuk mendapatkan info training SIS (Safety Instrumented System) & Control serta mendaftarkan diri anda mengikuti training SIS (Safety Instrumented System) & Control yang akan kami selenggarakan, anda dapat mengirim surel di email kami trainingsemangatindo@gmail.com atau anda dapat pula mengisi formulir pra registrasi yang tersedia dibawah ini. 

Form Request Training
  1. Isi Data Berikut ( Tidak Mengikat )
  2. (required)
  3. (valid email required)
  4. (required)
  5. (required)
  6. (required)
  7. (required)
  8. (required)
  9. (required)