HYSIS FIELD PROCESS ENGINEERING DESIGN FOR OIL GAS

Berikut ini adalah Informasi Jadwal Training / Seminar / Pelatihan HYSIS FIELD PROCESS ENGINEERING DESIGN FOR OIL GAS yang akan di selenggarakan oleh Semangatindo Training & Consulting, untuk mendapatkan informasi training lengkap serta mendaftarkan diri anda mengikuti training HYSIS FIELD PROCESS ENGINEERING DESIGN FOR OIL GAS yang akan kami selenggarakan, anda dapat menghubungi Tim Marketing via telpon atau sms di nomor 081226562746 – 087838196280 (WA), atau  mengirim surel di email kami marketing@semangatindo.com / trainingsemangatindo@gmail.com, anda dapat pula mengisi form request training / formulir pra registrasi yang tersedia pada situs kami.

Kami menyelenggarakan Public Training ataupun in House Training tentang HYSIS FIELD PROCESS ENGINEERING DESIGN FOR OIL GAS di berbagai kota besar di Indonesia yaitu Yogyakarta, Bandung, Jakarta, Tangerang, Bogor, Bali, Surabaya, Medan, Palembang, Riau, Padang, Lombok, Kupang, Balikpapan, Samarinda, Makasar, Malang, Batam, Semarang, serta kota-kota besar lainnya di Indonesia

OBJECTIVES

  1. Understand the basic concept of oil , gas and water handling processes and facilities, and how to operate this technology in field application.
  2. Diagnostic of oil and gas reservoir performance under actual drive mechanism and future performance with current handling processes.
  3. Analyze the production potential of reservoir under with actual handling system processes and to plan the better development processes according to reservoir capacity.
  4. Understand the fundamentals of microscopic and macroscopic aspects and phenomena of oil, gas and water handling processes.

TRAINING OUTLINES

Introduction

  1. The role and responsibility of each member of discipline
  2. The different type of project that proses engineering are involved with
  3. The complexities of a project
  4. A basic understanding of the deliverables each type of project.
  5. A basic understanding of the schedule for the different type of project

Process Simulator

  1. What is process simulator
    1. What are they
    2. How they are used
    3. How to determine the suitable one
  2. Process simulator needs
    1. Component and component behavior
    2. Process flowsheet or description
    3. Operating condition or design specification
    4. Calculate steady state process of heat and mass flow
    5. Model the surface facilities and gas plant
    6. Design or process evaluation
  3. Step to modular simulation(Hysis)
    1. Specify component and thermodynamic model
    2. Define process configuration
    3. Specify stream or unit operation connectivity
    4. Operation parameters are ready
    5. Run simulation
    6. Result Checking
    7. Check the simulation result is in line with the real design practice
    8. Verify the result

 

Process Simulation Unit Operation

  1. Select Hysis calculation block to represent process equipment
  2. Understanding of unit operation in Hysis
  3. Understanding single stage separation in Hysis

Process Simulation – Set & Adjust

  1. Describe the characteristic of feed forward controller
  2. Describe the characteristic of feedback controller
  3. Understand how to use SET as feed forward controller
  4. Understand how to ADJUST as feedback controller

 

Process Simulation – Crude Stabilizer

  1. Understand stream mixing and splitting block
  2. Understand pressure change block
  3. Select suitable heat transfer block
  4. Model a simple crude stabilizer

 

Recycle Stream

  1. Select suitable tear stream
  2. Installing recycle loop stream

PARTICIPANTS

Senior operators, Junior operators, Junior production engineers and supervisors, Well service engineers and supervisors, Materials, Logistics and warehouse personnel, Work over and Well services engineers and supervisors

 

METODE

Lecturing, presentasi, diskusi interaktif, sharing, studi kasus

Semangatindo Training & Consulting bekerjasama dengan trainer professional akan memberikan pemahaman secara komprehensif mengenai training tersebut.

Apabila Training/Pelatihan Ini Sesuai Dengan Kebutuhan Perusahaan anda, Silahkan Menghubungi Tim Marketing Kami Untuk Mendapatkan Surat Penawaran, Silabus Training, CV Instruktur dengan mengisi Form Request Training / Formulir Pra Registrasi Via Online  atau melalui Telp, Email, SMS, WA, BBM

Demikian kami sampaikan, atas perhatiannya, kami ucapkan terima kasih.

Salam Hangat

TIM MARKETING

Apabila judul yang anda cari tidak terdapat pada list jadwal training  maka anda dapat merequest judul pelatihan yang perusahaan anda butuhkan dengan menghubungi tim marketing kami.

Form Request Training
  1. Isi Data Berikut ( Tidak Mengikat )
  2. (required)
  3. (valid email required)
  4. (required)
  5. (required)
  6. (required)
  7. (required)
  8. (required)
  9. (required)