Gas Compression & Flow Metering

Berikut ini adalah Informasi Jadwal Training / Seminar / Pelatihan Gas Compression & Flow Metering yang akan di selenggarakan oleh Semangatindo Training & Consulting, untuk mendapatkan informasi training lengkap serta mendaftarkan diri anda mengikuti training Gas Compression & Flow Metering yang akan kami selenggarakan, anda dapat menghubungi Tim Marketing via telpon atau sms di nomor 081226562746 – 087838196280 (WA), atau  mengirim surel di email kami /, anda dapat pula mengisi form request training / formulir pra registrasi yang tersedia pada situs kami.

Kami menyelenggarakan Public Training ataupun in House Training tentang Gas Compression & Flow Metering di berbagai kota besar di Indonesia yaitu Yogyakarta, Bandung, Jakarta, Tangerang, Bogor, Bali, Surabaya, Medan, Palembang, Riau, Padang, Lombok, Kupang, Balikpapan, Samarinda, Makasar, Malang, Batam, Semarang, serta kota-kota besar lainnya di Indonesia


Gas production operations often require compressors to raise the pressure of the gas. This is accompanied by change of state of the gas which means change in temperature and volume of a quantum of gas going under compression . The most important ofcompressors such as providing enough pressure to a gas transport through transmission and distribution systems, reinjection of gas for pressure maintenance, circulation of gas through the process or system, raising gas pressure to the required level for a chemical processing reaction,etc. The compression calculations in the natural gas industry must be accurate and its of paramount importance for the gas industry. If an error occurs even though only 1.0 percent in the measurement of natural gas in the pipeline, this will give a loss either the seller or the purchaser amount of million a year, and certainly this is a bad thing and can be detrimental to the oil & gas company. Not only compression calculation but also the accuration of flow metering is importance. The Flow is one of the most difficult variable to measure, because it cannot be measured directly like pressure and temperature. It must be inferred by indirect means, such as pressure differential over a specified distance, speed of rotation of a rotating element, displacement rate in a measurement chamber, etc.

Course Outlines Gas Compression & Flow Metering:

Day 1

Overview of Gas Compression

  • Field gas compression systems.
  • Inlet gas compression prior to treating.
  • Outlet gas compression prior to export pipeline.
  • Compression for gas lift, gas gathering, condensate recovery,

transmission & distribution, gas re-injection & pressure maintenance.

Type of Compressor

  • Positive-displacement or intermittent
  • Flow and continuous flow units.
  • Reciprocating compressors.
  • Rotary positive-displacement and centrifugal compressors.
  • Axial and mixed-flow compressors.
  • Comparison between compressors and compressor selection.

Day 2

Basics and Performance of Gas Compression

  • Isothermal, isentropic and polytropic ideal compression processes.
  • Real gas behavior and compression ratio.
  • Design and determination of the number of stages.
  • Inlet flow rate and compression power calculation.
  • Compressor control and performance maps.
  • Nomograph for estimating compressor performance.
  • Estimation of HP required for compressing natural gas.
  • Performance testing guidelines for centrifugal compressors.

Day 3

Practical Guide to Accurate Flow Measurement.

  • Requisites of flow measurement and reference standards .
  • Custody and non-custody transfer.
  • Flow installation requirements and operational considerations.
  • Maintenance meter equipment, readouts and related devices.
  • Proving systems and auditing.
  • Accuracy, rangability and turndown.
  • Head type and mechanical type.
  • Electronic flowmeter and mass flowmeter.

Day 4

Practical Aspects of Flow Metering.

  • Orifice plate, venturi, flow nozzle and Pitot tube.
  • Variables area meters.
  • Mechanical flowmeters.
  • Turbin and rotary flowmeters.
  • Electronic and vortex flowmeters.
  • Ultrasonic flowmeters.
  • Mass flowmeters.
  • Coriolis flowmeters.
  • Thermal mass flowmeters.

Semangatindo Training & Consulting bekerjasama dengan trainer professional akan memberikan pemahaman secara komprehensif mengenai training tersebut.

Apabila Training/Pelatihan Ini Sesuai Dengan Kebutuhan Perusahaan anda, Silahkan Menghubungi Tim Marketing Kami Untuk Mendapatkan Surat Penawaran, Silabus Training, CV Instruktur dengan mengisi Form Request Training / Formulir Pra Registrasi Via Online  atau melalui Telp, Email, SMS, WA, BBM

Demikian kami sampaikan, atas perhatiannya, kami ucapkan terima kasih.

Salam Hangat


  • Kantor       : Jalan A.M. Sangaji No. 59 Kota Yogyakarta 55233
  • Telpon       : 0274 – 958 9590
  • Mobile       : 0812-2656-2746 / 0878-3819-6280 (wa)
  • Pin BB        : 57282CB1
  • Email          : /
  • Website     : – –

Apabila judul yang anda cari tidak terdapat pada list jadwal training  maka anda dapat merequest judul pelatihan yang perusahaan anda butuhkan dengan menghubungi tim marketing kami.

Form Request Training
  1. Isi Data Berikut ( Tidak Mengikat )
  2. (required)
  3. (valid email required)
  4. (required)
  5. (required)
  6. (required)
  7. (required)
  8. (required)
  9. (required)

WhatsApp WhatsApp kami