BEARING TECHNOLOGY AND LUBRICATION SYSTEMS

Berikut ini adalah Informasi Jadwal Training / Seminar / Pelatihan BEARING TECHNOLOGY AND LUBRICATION SYSTEMS yang akan di selenggarakan oleh Semangatindo Training & Consulting, untuk mendapatkan informasi training lengkap serta mendaftarkan diri anda mengikuti training BEARING TECHNOLOGY AND LUBRICATION SYSTEMS yang akan kami selenggarakan, anda dapat menghubungi Tim Marketing via telpon atau sms di nomor 081226562746 – 087838196280 (WA), atau  mengirim surel di email kami marketing@semangatindo.com / trainingsemangatindo@gmail.com, anda dapat pula mengisi form request training / formulir pra registrasi yang tersedia pada situs kami.

Kami menyelenggarakan Public Training ataupun in House Training tentang BEARING TECHNOLOGY AND LUBRICATION SYSTEMS di berbagai kota besar di Indonesia yaitu Yogyakarta, Bandung, Jakarta, Tangerang, Bogor, Bali, Surabaya, Medan, Palembang, Riau, Padang, Lombok, Kupang, Balikpapan, Samarinda, Makasar, Malang, Batam, Semarang, serta kota-kota besar lainnya di Indonesia

DESCRIPTION TRAINING BEARING TECHNOLOGY AND LUBRICATION SYSTEMS

The objective of this training is to provide the participants’ theory and practical aspects of bearing technology and lubrication for industrial applications. The training will discuss rolling element bearing, hydrodynamic and hydrostatic bearing technology, including the selection of bearing type and size, applications, mounting and dismounting, maintenance, and bearing failures. The training will also give practical review of the basic lubrication theory, friction, wear, lubricant analysis, lubrication scheduling and selection of lubrication systems.
The knowledge will assist technician, engineers and maintenance managers in the proper selection of bearings, lubricants, suppliers, and services that will contribute to the effectiveness of the overall plant performance that will better improve machine availability, lifetime, production, and profit.

PESERTA  TRAINING BEARING TECHNOLOGY AND LUBRICATION SYSTEMS

  • Mechanical Engineers
  • Maintenance Engineers and Supervisors
  • Service Engineers and Supervisors
  • Work over Engineers and Supervisors
  • Maintenance Technicians

MATERI TRAINING BEARING TECHNOLOGY AND LUBRICATION SYSTEMS

1. Introduction :

  • Historical Review, Teratology.
  • Bearing : Basic Theory and Classification.
  • Lubricant. Lubrication systems. Maintenance.

2. Rolling and Sliding Friction, Wear and Abrasion

  • Fundamental Friction Mechanism.
  • Sliding Friction: Adhesion, Sloughing, and Deformation.
  • Rolling Friction: Adhesion, Micro slip, Elastic Hysteric’s, Plastic Deformation.
  • Coefficients of Friction.
  • Wear Mechanism: Adhesive Wear, Abrasive Wear, Fatigue Wear, Corrosive Wear, Fretting Wear, And Erosive Wear, Wear Prevention.

3. Lubrication Theory

  • Hydrodynamic Lubrication: Generalized Reynolds Equation, Velocity Distribution.
  • Mechanism of Load Support.
  • Squeeze Film.
  • Hydrostatic Lubrication.
  • Cavitations.
  •  Boundary Lubrication: Structure of Boundary Lubrication, General Properties of Metallic Film, Absorption of Lubricants, Wet ability and Contact angle.
  • Elastohydrodynamic Lubrication. Mixed Lubrication. Solid Film Lubrication.

4. Rolling Element Bearing

  •  Introduction.
  • Bearing Types: Ball Bearing, Roller Bearing.
  • Geometry.
  • Kinematics.
  • Separators.
  •  Static Load Distribution: Load Deflection Relationships, Radically Loaded Bearing, Trust Loaded Bearing, Preloading, Static Load Rating.
  • atigue Life: Contact Fatigue Theory, We bull Distribution, Dynamic Load Rating, Equivalent Dynamic Load, and Life Adjustment Factors.
  • Operating and Performance Parameters.
  • Design Procedure.
  •  Tolerances.
  •  Selection of Bearing Type and Size.
  •  Bearing Life. Mounting and Dismounting.

5. Hydrodynamic and Hydrostatic Bearings

  • Introduction.
  • Sliding Bearing Loads.
  • Static and Dynamic Load Rating.
  •  Trust Slider Bearing: Mechanism of Pressure, General Trust Sliding Bearing Theory.
  • Hydrodynamic Trust Bearing.
  • Operating and maintenance.
  • Geometry.
  • Journal Sliding Bearing: Petrov’s Equation, Journal Bearing Operation, Squeeze Film Bearing.
  •  Hydrostatic Bearing.
  • Gas-Lubricated Bearing.
  • Operating and Performance Parameters.
  •  Design Procedure.
  • Tolerances.
  •  Selection of Bearing Type and Size.
  • Bearing Life.
  •  Mounting and Dismounting.

6. Application of Lubricants: Schedule and System Selection

  • Load and Pressure.
  • Temperature.
  • Speed of Applications.
  • Operating Conditions.
  • Manufacturer’s Recommendations.
  • Basic Lubrication Requirement Calculation.
  • Exceptions.
  •  Oil or Grease?.
  • Manual Versus Automatic.
  • Delivery Systems.
  • Basic Selection Procedure for Lubrication System Design.
  • Trouble Shooting.

7. Lubricant Analysis

  • Oil classifications.
  • Comparison of Advantages and Disvantages.
  • Viscosity. Viscosity index.
  • Oils Characteristics.
  • Oil Standards.
  •  Oil Additives.
  • Change out of Brands or Types of Oil. Grease.
  • Grease Classifications.
  •  Grease Characteristics.
  •  Pumping Grease.
  • Synthetic Lubricants.
  • Oil Analysis.

8. Bearing Failure Analysis & Repair

  •  Failure Pattern and Failure Analysis.
  • Sliding Bearing Failures.
  • Rolling Bearing Failures.
  • Repair of Worn Surfaces.
  • Wear Resistant Materials.
  • Repair of Sliding Bearing.

METODE TRAINING BEARING TECHNOLOGY AND LUBRICATION SYSTEMS

Presentasi, Diskusi, Simulasi, Studi kasus, Evaluasi

Semangatindo Training & Consulting bekerjasama dengan trainer professional akan memberikan pemahaman secara komprehensif mengenai training tersebut.

Apabila Training/Pelatihan Ini Sesuai Dengan Kebutuhan Perusahaan anda, Silahkan Menghubungi Tim Marketing Kami Untuk Mendapatkan Surat Penawaran, Silabus Training, CV Instruktur dengan mengisi Form Request Training / Formulir Pra Registrasi Via Online  atau melalui Telp, Email, SMS, WA, BBM

Demikian kami sampaikan, atas perhatiannya, kami ucapkan terima kasih.

Salam Hangat

TIM MARKETING

  • Kantor       : Jalan A.M. Sangaji No. 59 Kota Yogyakarta 55233
  • Telpon       : 0274 – 958 9590
  • Mobile       : 0812-2656-2746 / 0878-3819-6280 (wa)
  • Pin BB        : 57282CB1
  • Email          : trainingsemangatindo@gmail.com / marketing@semangatindo.com
  • Website     : semangatindo.com – pusatjadwaltraining.com – infojadwaltraining.com

Apabila judul yang anda cari tidak terdapat pada list jadwal training  maka anda dapat merequest judul pelatihan yang perusahaan anda butuhkan dengan menghubungi tim marketing kami.

Form Request Training
  1. Isi Data Berikut ( Tidak Mengikat )
  2. (required)
  3. (valid email required)
  4. (required)
  5. (required)
  6. (required)
  7. (required)
  8. (required)
  9. (required)
 

WhatsApp WhatsApp kami